Search results

Children with Autism Spectrum Disorder (ASD) can demonstrate a preference for using digital technologies which can represent a relative strength within the autism community. Such a strength would have implications for digitally mediated interventions and support for autism. However, research to date has not developed a methodology for assessing the capabilities of minimally verbal children on the autism spectrum with intellectual disability (ID) to use digital technology.

Six minimally verbal children with ASD and ID undertook an accessible assessment that identified what capabilities for interacting with a digital tablet device they could and could not demonstrate. Twelve brief assessments were demonstrated, including turning on the device, adjusting the volume, operating the camera, touching, tilting and rotating the screen.

Participants could be assessed on their digital capabilities. In this study, participants could largely touch and swipe the screen effectively and leave the app, but could not tilt and rotate the screen nor turn on the digital tablet device.

While the numbers were small, the findings indicate that the digital capabilities of this group can usefully be assessed. Future research can use such assessments to highlight how intervention effectiveness and support can be enhanced by matching the digital capacities of minimally verbal children with ASD and ID to technological support. This is a preliminary study and a greater understanding of children’s prior experiences with technology will better inform how and which digital capabilities develop.

This is the first study to assess a range of basic capabilities for using digital tablet devices in minimally verbal children with ASD and ID.

This work proposes to test the C‐40 deontological code of collective orientation specifically for franchise associations. The literature review revealed a lack of studies about this type of codes.

This code adopts a semi‐normative approach in trying to standardize what form a deontological code of a franchise association should take. The study has been developed from an international perspective, making easier its spread and generalization. Furthermore, a novel methodology in this area has been applied to test the code: “The Experton Theory”.

As a consequence, from the review of ethical and deontological codes from franchise associations of 46 countries, some associations' statutes and the laws about franchising in some countries, 29 topics were identified. Additionally, 11 more have been added to these contents, making 40 items which conform with what should be integrated into whatever franchising deontological code.

The main limitations of this work refer to the proposition and validation of some questions included in the C‐40 code. Specifically, some of them show opinion divergences of the experts' answers over 25 percent.

The proposed code might be used as a background for franchise associations at an international level. It encourages the increase of ethical and business contents in the existing codes and, therefore, the improvement of the relationships among franchisers, franchisees and the rest of the stakeholders.

This study is focused on a scarcely treated topic in the literature: deontological codes in franchising. In addition, it has been developed from an international perspective, making its spread and generalization easier.

Critique originated by earlier theorization of environmental accounting, as a way of building environmentalist visibility of business, led Gray et al., to study environmental accounting in the dynamics of organizational change. They concluded that environmental accounting is being used to “negotiate the conception of the environment” by companies that have not significantly changed. In order to investigate whether Gray et al.’s model and conclusions apply to a different cultural context, we have conducted nine case studies in Spain. We found that Spanish organizations are not truly changing their conventional perception of the environment, even in those cases where generalized structural and organizational changes are taking place. Moreover, the use of environmental accounting is coupled with an attempt to negotiate and control the environmental agenda.

The purpose of this paper is to explore consumers' perceptions of price unfairness in services, what are its antecedents and when it is important for the consumer. Thus, the central question of this research is whether consumers care about how much profit the service company is making and whether there are significant differences to physical goods.

Building on justice and equity theory, a causal model is developed – which analyses the main antecedents (seller profits vs customer value), moderators and consequences of perceptions of price unfairness. Structural equation modelling has been applied to test the proposed model.

The lack of specific tools to measure perceptions of price fairness required the development of a multi‐item scale to capture the complexity of the evaluation. This instrument has been tested for reliability and validity in a variety of settings, with excellent results, and can be appropriate when using the survey as a data collection method. Also, the authors have argued that there should be significant differences due to the nature of the product – service industries vs physical goods– as well as due to the number of available alternatives that the buyer has in the market.

The validity of a new model is tested by means of an empirical research conducted in four different settings, two different services (automobile repair services and music concerts) and their related physical goods (automobiles and music CDs). A multi‐item scale is also developed to capture the complexity of price fairness perceptions. Finally, significant differences between contexts, as well as due to the number of available alternatives present in the marketplace are examined.

City planning and construction have embraced circular economy principles, converting them into various indicators. Particularly in the European context, the question “what architecture for circularity?” is answered with policies focusing on techniques, materials and disassembling construction. This paper analyzes a new approach to sustainable design and explores the concept of Km0 architecture. The objective is to demonstrate the design strategies of a contemporary architecture based on local resources and knowledge, an architecture that works with the shortest possible loop in circularity, i.e. with the cycle that consumes the least amount of energy.

The paper presents two ways of understanding sustainability in architecture: the first as a result of policies and the second associated with the design and innovative-based New European Bauhaus initiative. Within the scope of this last understanding, the authors analyze three cases on the Spanish Mediterranean coast that have recently received media attention and prominence. The selection responds to a specific climate adaption through a certain typological and functional diversity of the works.

The studied cases exhibit a more equitable and cost-effective circularity based on the time factor, have long life-cycle designs and serve as repositories of cultural identity. Km0 architecture reduces emissions using local resources and mitigates environmental conditions by combining traditional and modern design strategies.

This paper fulfills an identified need to study the local understandings of the built environment that would ensure a more fair and inclusive European green transformation.

Corporate social responsibility (CSR) research intellectual structures are analysed and compared on the basis of the main international journals of management and tourism.

Document co-citation, author co-citation and word co-occurrence are carried out using UCINET and NODEXL, software for social network analysis (SNA).

Differences and similarities between both research fields are provided, study limitations are pointed out and future research lines are suggested.

The main works concerning the topic of CSR are identified for each area of knowledge management and tourism. These are the basis for constructing the corresponding knowledge, and co-citation patterns among them are shown graphically.

This paper aims to present an analysis of entrepreneurial activities that emphasises anticipation and the art of future exploration; in so doing, it identifies important aspects of entrepreneurship as aesthetic or creative activities.

After a short synthesis of the main entrepreneurial functions in terms of decision making in the financial sphere, the managerial sphere, and the “booster” sphere, the paper concentrates on the qualities required for a successful “booster” function (motivation, ambition, innovation, cooperation, proactiveness). Because proactiveness and innovation both require futures thinking and creativity, the paper presents relevant material from the literature on long‐term foresight to establish the artistic aspects of these important components of entrepreneurial activities.

The paper's linking of entrepreneurial functions to the capacity for anticipation establishes the need for entrepreneurs to acquire competencies (in the area of forecasting) that are usually associated with artistic endeavours.

There is an urgent need for university curricula to include material that is oriented towards the training of entrepreneurs. This should include specific courses on creativity and forecasting.

The recognition that key entrepreneurial functions (proactiveness and innovation) are more art than science, and that they therefore require a set of operational tools, is relatively novel in the current literature on entrepreneurial (and managerial) functions, and opens a research field in business decision making.

The purpose of this study is to cover the influence of selected printing parameters at a macro and micro-geometrical level, focusing on the dimensions, geometry and surface of printed parts with short carbon fibers reinforced PLA. For this case study, a hollow cylindrical shape is considered, aiming to cover the gap detected in previous works analyzed.

Nowadays, additive manufacturing plays a very important role in the manufacturing industry, as can be seen through its numerous research and applications that can be found. Within the engineering industry, geometrical tolerances are essential for the functionality of the parts and their assembly, but the variability in three-dimensional (3D) printing makes dimensional control a difficult task. Constant development in 3D printing allows, more and more, printed parts with controlled and narrowed geometrical deviations and tolerances. So, it is essential to continue narrowing the studies to achieve the optimal printed parts, optimizing the manufacturing process as well.

Results present the relation between the selected printing parameters and the resulting printed part, showing the main deviations and the eligible values to achieve a better tolerance control. Also, from these results obtained, we present a parametric model that relates the geometrical deviations considered in this study with the printing parameters. It can provide an overview of the piece before printing it and so, adjusting the printing parameters and reducing time and number of printings to achieve a good part.

The main contribution is the study of the geometry selected under a 3D printing process, which is important because it considers parts that are created to fit together and need to comply with the required tolerances. Also, we consider that the parametric model can be a suitable approach to selecting the optimal printing parameters before printing.

This research enables the authors to highlight the importance of proper pricing for retailers. The purpose of this paper is to demonstrate the importance of demand-based pricing, providing empirical results that reveal the validity of this pricing philosophy in the sport retailing industry. In particular, this study has identified the limits of acceptable prices for the products studied, selected the most appropriate method for pricing products suffering from high competition and compared the impact produced on price perceptions according to different retail environments to be able to relate changes in the acceptable prices ranges according to the geographical location of each point of sale, differentiating between rural or urban environment and type of client.

The authors have carried out surveys of 350 customers in each of the three points of sale analysed. Therefore, there are a total of 1,050 interviewees, for the three products analysed. The direct method of acceptable prices setting is developed. In addition, ANOVA and t-test have been carried out to find differences between the three shops.

One main finding is that the acceptable price range is not unique. Each point of sale has one that is distinct because it depends on many factors: the competition, the economic capacity of the closest residents, the location of the point of sale or the ability to attract customers.

The foremost contribution of this paper is to demonstrate empirically how considering the local demand at setting prices would generate larger earnings, even for a small retail chain. The direct method of setting acceptable prices enables us to set the prices according to the demand. The best option is if these prices are above the costs. It can be noted that the prices should be set according to each shop, and a different price used in each point of sale to maximise profits and to adapt to what the typical customer of each shop is willing to pay, despite the products being the same and the points of sale belonging to the same retail chain.

Esta investigación nos permite resaltar la importancia de una fijación de precios adecuada para los minoristas. El objetivo principal de esta investigación es demostrar la importancia de la fijación de precios basada en la demanda, proporcionando resultados empíricos que revelan la validez de esta filosofía de fijación de precios en el sector minorista de productos deportivos. En particular, en este estudio se han identificado los intervalos de precios aceptables para los productos estudiados; se ha seleccionado el método más apropiado para la fijación de precios de productos que sufren alta competencia; y se ha comparado el impacto en las percepciones de precios según el entorno detallista y se han encontrado cambios en los intervalos aceptables de precios en función de la localización geográfica del punto de venta, diferenciando entre entorno rural y urbano, y el tipo de cliente.

Los autores han realizado encuestas a 350 clientes en cada uno de los 3 puntos de venta analizados. Por lo tanto, hay un total de 1050 entrevistados, para los 3 productos analizados. Se desarrolla el método directo de fijación de precios aceptables. Además, se han realizado pruebas ANOVAs y T para encontrar diferencias entre las 3 tiendas.

Un hallazgo principal es que el intervalo de precios aceptable no es único. Cada punto de venta tiene uno distinto porque depende de muchos factores: la competencia, la capacidad económica de los residentes más cercanos, la ubicación del punto de venta o la capacidad de atraer clientes.

La principal contribución de este artículo es demostrar empíricamente cómo considerar la demanda local al establecer precios generaría mayores ganancias, incluso para una pequeña cadena minorista. El método directo de establecer precios aceptables nos permite establecer los precios de acuerdo con la demanda. La mejor opción es si estos precios están por encima de los costos. Se puede observar que los precios deben establecerse de acuerdo con cada tienda, y se debe usar un precio diferente en cada punto de venta para maximizar los beneficios y adaptarse a lo que el cliente típico de cada tienda está dispuesto a pagar. A pesar de que los productos son los mismos y los puntos de venta pertenecientes a la misma cadena minorista.